Double Glazing Locks Repair
When a double-glazed windows will not close, it creates drafts that allow heat to escape. This can also compromise the security of your home and puts you at a higher chance of being burglarized.
Over time, double glazed window hinges handles, seals and handles can be damaged. If this happens it can impact the functionality of your windows and cancel any warranties you might have.
Faulty locks
While a lot of people are careful when installing anti-burglar security systems for their gates and main doors, it is often overlooked that the windows are prime targets for burglars. A poor lock can lead to draughts in the house, allow valuable heat to escape, and weaken the security of your home.
If double glazing repairs do not function, it is most likely that the mechanism of the lock is blocked. This is typically due to a slit in the gearbox component. This can cause the handle to turn 360 degrees, but not open. This is a common issue with uPVC casement windows, but can also be present in tilt and turn windows and even sliding sash windows.
If this happens, release the lock by pressing the lever handle. This can help to unblock the gear box and restore the opening of the window. If this does not work, you may have to replace the window lock mechanism completely.
Most modern uPVC windows use espagnolette locks. They are an internal locking system that secures the window utilising mushroom-like locking cams that are inserted into the frame. The handle is the one that operates the gearbox that then triggers the cams to move up or down. The spindle of the lock can break, causing the handle not to move, but the window to either open or close.
A malfunctioning transmission may make your window appear locked but it's not. This is usually the case when the central rods (sometimes known as crocodile teeth fixings) within the gearbox have broken off. Misty Glaze will supply and install replacement rods in the event that this occurs.
It is crucial not to try to force a stuck or broken lock. This can cause the lock to snap or break, especially with a uPVC window that expands and expands as it warms and cools. It is best to call a professional locksmith who can determine the issue and repair it.
Sticky Doors/Window
It's annoying to have doors and windows that don't close, but they may be a sign of more serious structural problems. If you're having difficulty to open or close a door or window, it's important to seek help from a professional as soon as possible. This issue can be caused by a variety of causes like foundation settlement or the lack of support for the crawl space.
Frame problems or humidity can cause windows and doors to stick. If your frames are made of wood, for instance, they can warp when exposed to humidity. Even if the hardware appears nice, it can make it difficult to open and close your frames. In this case, the wood swells and presses against the hinges, causing friction.
Rub the door or window with soap to lessen friction, especially if it is stuck in the summer. This will make it smaller and may temporarily solve the issue. This solution may need to be repeated periodically during periods of high humidity.
A more permanent fix involves making the door or window frame down to an even finish. This can be done by hand or with the power tool. A professional can also stain and sand or paint your window or door frame to make it look like new.
If the sanding and soap don't help it's likely the issue is due to foundation settlement or a damaged crawl space. Look for cracks in the area. It's time to contact a foundation specialist if you see any of these indications. Foundation damage can cause uneven floors and misaligned interior walls, which in turn causes sticking doors and windows. It is important to address these issues as early as you can to avoid expensive and dangerous repairs in the future. These issues can get worse until your home becomes structurally unstable if left unattended. Contact the Southeast's leading foundation repair experts today to schedule an inspection and repair!
Cracking/Blowing Issues
Cracks can appear when double glazing starts to degrade. This can be unsightly and it also allows all the heat that's build up in your home to escape. It also poses a safety threat to your family as the glass pieces can cause injury if they break. It is best to repair any double glazing windows that have a crack before it gets worse, since this could increase the cost of replacing them.
Window seals are vital to prevent drafts from entering your home and keep air in between the window panes. Over time, the seals can shrink or become perished because of changes in weather. Unchecked, it can cause condensation, moisture and draughts inside your home.
A professional will usually be able to solve this problem. They can replace the window seal to restore your windows back to their original condition. They will also suggest features that will reduce future stress cracks, for example trickle ventilation to improve ventilation.
It is also possible to lubricate the handles and hinges of your windows and door. This will allow them to move more easily, and the lock to function as it should. Put some lubricating oil on a lint-free cloth and rub it into the hinges and handle mechanism as well as places where they pass through the frame (for example, for sash windows). You can also remove the handles and clean them in warm soapy water to remove any dirt or dirt.
If your uPVC doors and windows aren't functioning as they should, it's crucial to contact a professional to repair them. They will be able to identify the issue quickly and fix it in a short time. It's safer and less expensive than attempting to fix the issue yourself and potentially damaging the mechanism. It will also give you peace of mind knowing your home is safe and secure.